By John Weidner, Owner, ID Homes · Published November 9, 2026 · Updated November 9, 2026
Choose a design-build firm on four things: whether its license actually covers your project, who actually does the design and what you receive for it, whether the portfolio matches your project’s scope rather than its style, and how the contract handles price and changes. Everything else – the showroom, the awards, the photos – is secondary. Here is how to choose a design-build firm the way we would if we were the homeowner, including what works differently in Chicago and the suburbs than in most of the country.
1. What a design-build firm actually does
A design-build firm designs and builds your project under one contract. The architect, the estimator and the construction team work for the same company, so what gets drawn is priced as it is drawn, and the person who promised you a number is the one who has to hit it.
The traditional alternative is design-bid-build: you hire an architect, take the finished drawings to several contractors, pick one, and then manage two separate relationships. When the bids come back over budget – which is common – you pay the architect again to redesign. Design-build removes that loop. It also removes a check: with one firm, nobody independent is reviewing the builder’s price. That is why the questions below matter more than they would with a bid process.
2. Check the license – and know that Illinois works differently
Most online advice tells you to look up the firm’s state general contractor license. In Illinois you cannot, because there is no statewide general contractor license. Licensing happens at the municipal level, and that changes what you should ask for.
In the City of Chicago, general contractors are licensed by the Department of Buildings in five classes based on the maximum value of a single project:
| Class | Maximum project value | Minimum liability insurance |
|---|---|---|
| E | $500,000 | $1 million per occurrence |
| D | $2 million | $1 million per occurrence, $2 million aggregate |
| C | $5 million | $1 million per occurrence, $2 million aggregate |
| B | $10 million | $3 million per occurrence |
| A | Unlimited | $5 million per occurrence |
“Project value” means the fair market value of all labor and materials on the site, from every contractor and subcontractor combined. A custom home or a full second story addition in Chicago can run past the Class E limit, so a firm holding only a Class E license may not legally be able to pull the permit for your job. Ask which class the firm holds and check it against your project. You can verify any Chicago GC license through the city’s online license lookup.
In the suburbs – Park Ridge, Skokie, Glenview, Northbrook, Hinsdale and the rest – most villages require contractors to register with the building department before pulling a permit, usually with an application, a bond and an insurance certificate. This is a formality, not a barrier: a firm based in Chicago or in another suburb can register in any village, typically within days, and the firm does not need an office or a presence in your town. What matters is that they know the requirement and handle it before the permit application, not after.
Two licenses that are statewide. If the firm’s design-build process includes a licensed architect – as it should for anything structural – that architect is licensed by the Illinois Department of Financial and Professional Regulation (IDFPR), and you can look them up by name. Roofing contractors are also licensed by IDFPR. Everything else in residential construction is municipal.
What to ask for, in writing: the GC license number and class; confirmation that they will register with your village before applying for the permit; certificates of general liability and workers’ compensation insurance naming you as certificate holder; and the architect’s IDFPR license number. A firm that hesitates on any of the three has told you what you need to know.
3. Ask who does the design and what you get for it
“Design-build” covers two very different setups. Some firms have an architect on staff; others send your project to an outside architect and call it design-build because they manage the handoff. Both can work. The difference is who answers when a structural question comes up in week nine, and how fast.
Ask three things:
- Who draws the plans, and are they licensed? For an addition or a new house you need stamped drawings from an Illinois-licensed architect or structural engineer anyway – Chicago and the villages will not issue a permit without them.
- What do I receive at the end of the design phase? The minimum is a permit-ready set: floor plans, elevations, sections, structural drawings and energy compliance. Better firms also give you a 3D model or renderings you can react to, a written scope of work, and a cost breakdown tied to the drawings. If the answer is “a concept sketch and an estimate,” the real design work – and the real cost – comes later.
- Who owns the drawings if I don’t build with you? Some firms release them after the design fee is paid; some do not. Know before you sign.
At ID Homes the architect is in-house, and the permit set is produced by the same team that will build from it. We think that is the point of design-build, but the honest test is not what a firm calls itself – it is whether the person who drew your plans will be on your site.
4. Judge the portfolio by scope, not photos
When you are deciding how to choose a design-build firm, the portfolio is where most people start – and where most people are misled. A portfolio tells you what a firm has done, not what it can do. Twenty kitchen remodels do not prepare a company for taking the roof off a bungalow and adding a floor. Look for three matches:
- Project type. If you want a second story addition, look for completed second story additions – not additions in general, and not new construction, which is a different sequence of work.
- House type and area. A firm that has built on 25-foot Chicago lots knows the setbacks, the alley access and the neighbors eighteen inches away. One that works on quarter-acre suburban lots may not. Ask for addresses you can drive past.
- Timeframe. Ask for projects finished in the last two or three years. Crews, subcontractors and project managers change; a portfolio from 2015 says little about the team you would get.
Ask for two references from projects like yours, and ask those references the same two questions: did the final number match the contract, and how did the firm handle the thing that went wrong – because something always does.
5. Ask how they price – and what the contract actually covers
Design-build firms charge for design in one of three ways, and each changes how you should read the proposal:
| Model | How it works | What to ask |
|---|---|---|
| Separate design fee, credited to the build | You pay for the design phase up front; if you build with the firm, that fee is deducted from the construction contract | What happens to the drawings if I walk away after design? |
| Design included in the build price | No separate fee; design cost is carried inside the construction contract | How far does design go before I commit to the build contract? |
| Cost-plus | You pay actual costs plus a fixed percentage or fee; design is one of the costs | What is the fee, and how are allowances and overruns reported? |
At ID Homes the first step is a concept – free or for a nominal fee – so you can see the direction and a budget range before committing to anything. The full design and permit set are produced after the contract is signed, as part of it, so you are not paying for drawings twice.
Whatever the model, the contract should spell out five things before you sign:
- Fixed price or estimate. A fixed-price contract means the number is the number unless you change the scope. An estimate means it can move. Know which you are signing.
- Allowances. Line items like tile, fixtures and appliances are often set as allowances – a budget you can spend. Ask whether the allowances are realistic for what you have in mind, or set low to make the total look good.
- Change orders. Any change to scope or price should be written, priced and approved by you before the work happens. Verbal changes are where budgets die.
- Payment schedule tied to milestones, not to dates. You pay when the foundation is done, not on the first of the month.
- Warranty. What is covered, for how long, and who you call.
6. Ask how they communicate once construction starts
The design phase is pleasant: meetings, renderings, choices. Construction is where you find out what the firm is like. Before you sign, ask:
- Who is my single point of contact, and is that person on site? A project manager you can reach the same day is worth more than an owner you meet once.
- How often do I get an update, and in what form? Weekly written update with photos and the next two weeks’ schedule is a reasonable standard. “Call anytime” is not a system.
- How are decisions tracked? Selections, approvals and change orders should live somewhere you can see – a project portal, a shared document, even a running email thread – not in someone’s head.
- What happens when something goes wrong? Ask for a real example. A firm that has never had a problem has not done enough work, or is not telling you.
This matters most on projects where you are not living in the house. On a second story addition, the roof is off and you are elsewhere for weeks; the update is the only way you know what is happening to your home.
7. Red flags that should end the conversation
Any one of these is enough to walk away, however good the renderings look:
- A fixed price before anyone has been inside your house. A ballpark range at the first meeting is normal and useful – every experienced builder can give one. A firm price, or a contract to sign, before a site visit and before there are drawings is not: nobody can know what your foundation, structure and scope will cost until they have looked.
- “You don’t need a permit for this.” For an addition, a second story, structural work or a new house in Chicago or any suburb, you do. A firm that says otherwise is either uninformed or planning to put the risk on you – unpermitted work becomes your problem when you sell.
- No written proof of insurance. Certificates of general liability and workers’ compensation, current, naming you. If a worker is hurt on your property and the firm is uninsured, the claim can land on your homeowner’s policy.
- A license in a class that does not cover your project (section 2).
- A large deposit before design is done. A design fee is normal. Thirty or forty percent of a construction contract before there are drawings is not.
- Pressure to sign today. A price that is only good this week is a sales tactic, not a construction schedule.
- No addresses. If the firm cannot give you two completed projects you can see from the street, the portfolio may not be theirs.
- Only one person knows everything. Ask who covers when the owner or project manager is unavailable. If the answer is nobody, your project stops whenever they do.
What we would want you to ask us
If you are interviewing design-build firms in Chicago or the suburbs – including us – these are the eight questions we would want a homeowner to put on the table at the first meeting:
- What class of Chicago GC license do you hold, and will you handle the village registration for my permit?
- Who will draw my plans, and what is their IDFPR license number?
- What exactly do I receive at the end of design, and who owns it if I don’t proceed?
- Show me two projects like mine finished in the last three years, with addresses.
- Is the proposal a fixed price or an estimate, and how are allowances set?
- How are change orders approved and priced?
- Who is my point of contact during construction, and how often will I hear from them?
- Tell me about a project where something went wrong and what you did.
We are happy to answer all of these.
Frequently asked questions
How to choose a design-build firm – what matters most?
Four things: that the firm holds a general contractor license in a class that covers your project, that a licensed architect does the design and you know what you receive for it, that the portfolio matches your project’s scope, and that the contract spells out price, allowances and change orders. Showrooms, awards and photos come after those four.
Does a design-build firm need a license in Illinois?
Illinois has no statewide general contractor license. In the City of Chicago, general contractors are licensed by the Department of Buildings in five classes (A through E) based on maximum project value; suburban villages register contractors individually. The architect on the team is licensed statewide by IDFPR. Ask for the license class or village registration in writing before you sign.
How do design-build firms charge for design?
Three models are common: a separate design fee credited against the construction contract if you proceed; design included in the build price; or cost-plus, where design is one of the billed costs. None is inherently better – what matters is knowing which one you are signing and what happens to the drawings if you stop after design.
Is design-build cheaper than hiring an architect and a contractor separately?
Usually not cheaper on paper, but more predictable. Because the builder prices the design as it is drawn, you avoid the redesign cycle that happens when separate bids come in over budget. The saving is in fewer change orders and a shorter timeline, not in a lower starting number.
Ready to talk to a design-build firm?
How to choose a design-build firm comes down to this: the company you pick will be in your house for the better part of a year. Spend the first hour on licenses, drawings and the contract, not on the showroom – the showroom will still be there after you have the answers.
Planning a custom home or addition in Chicago or the North and West suburbs? Schedule a consultation with ID Homes – bring the eight questions above, and we will answer all of them. See how we work as custom home builders near Chicago and across the North and West suburbs.
About the author
John Weidner is the owner of ID Homes, a design-build firm based in Park Ridge, Illinois. He leads design and pre-construction on the company’s custom homes and second story additions across Chicago and the North and West suburbs.

